By Michael Svitak, Elite Team Cinematographer
Waiting for Lightning, a documentary about pro skateboarding pioneer Danny Way, began production in 2008 with director Jacob Rosenberg at the helm slinging a cumbersome Sony XDCAM on his shoulder shooting B-Roll with its star at the Mega Ramp in Tehatchape, CA. The final frame was shot with a Lomokino Super 35 Movie Maker in April 2012 on the island of Kauai, HI. Over the course of those four years, the documentary would embrace the modern evolution of camera systems to complete the project.
I was asked to take over the Cinematographer responsibilities in September 2010 as funding from DC Shoes and Bandito Brothers came through and Rosenberg was beginning the bulk of the documentary’s interview work. The Canon 5Ds were still getting the dust and debris blown off the sensors from the last Bandito production, Act of Valor, as off we set off to capture the journey of Danny Way through the memories of over 50 interviewees. The majority of the shoot took place in North County San Diego, so a few times a week a talented crew of 5-6 would pile into a passenger van with all the equipment and shoot 2-3 interviews.
On my crew, I had either Camera Assistant Geoff Goodloe or Gaffer Robert Grower and a Camera PA to keep us stocked with fresh CF cards and batteries. The interviews typically lasted about 2-3 hours. Producer Hana Ripperger-Suhler was in charge of all the details, which also happened to include sound mixing the interviews. Rosenberg conducted the interviews and oversaw production.
The primary camera package, donated by Revolution Cinema Rentals for the documentary project, consisted of three Canon 5D bodies, three tripods, a set of Canon “L” series primes, Canon 24-70mm, Canon 70-200mm zoom, two sets of 77mm Tiffen Water White IR ND filters, two SmallHD DP6 on-board monitors, a HP Dreamcolor lighting monitor and 20 Hoodman 16GB CF cards. We used the Canon 70-200mm IS t2.8 for the master interview camera. I would utilize the zoom and give the camera a slight floating feeling at particular points during the interview. Depending on the location, I would set up a 3/4-profile camera into the shadow side of the subject using the Canon 100mm Macro, 135mm or another 70-200mm.
For the third camera, I would find an abstract wide angle using the 21-35mm ASPH Leica R zoom t3.5 and screw on as much Tiffen Water White IR ND glass as I could to shoot wide open and utilize the magnificent depth of field of the 5D sensor. The other two cameras were lit or NDed to a t4-5.6 split. We chose to use IR ND filters because Rosenberg and I liked the slight green and golden color shift we saw when we put them up on the cameras. The 5D doesn’t need IR glass in front of the camera for any compensation issues, but it enhanced the green foliage and golden color of the skateboard ramps, commonly in our backgrounds, while not detracting from our subjects’ skin tones so we went with it as a look. To compliment the filters, I designed a picture profile for the documentary using the Canon Picture Style Editor and imbedded it into the cameras as a User Def setting.
Our typical grip and lighting package consisted of:
1 – Kino Flo Parabeam
1 – 400 Joker w/ Chimera
1 – 800 Joker w/ Chimera
1 – LEDZ Mini Par
2 – Arri 650w fresnel
1 – Arri 1000w fresnel
1 – 6 lite tungsten Barger (for recreates only)
1 – 3 lite tungsten Barger (for recreates only)
1 – Action Packer of misc. Home Depot clamp lights
6 – c-stands
2 – coleman stands
4 – beefy baby stands
2 – grip combo stands
1 – 8x frame w/ ears and corners
1 – 8x silent lite grid
1 – 8x hi lite
16 – shot bags
2 – floppies
2 – platypus clamps
1 – 4×2 silver/white bounce board
2 – 4×4 hard/soft white bounce board
1 – family of 2×3 flags and nets (single, double, silk, solid)
1 – 2×3 of 250
1 – 2×3 of 216
1 – leko with a 36-degree lens
The most common lighting setup for interviews was using an 800W Joker bounced and diffused through a 1/2 Lite Grid or 250 frame as a soft book-light or, if the exterior location was extremely bright, we would put a chimera on and go direct with the lamp. To create an edgy backlight, we used a 400W Joker with diffusion and sometimes 1/4 CTO. Our minimal crew did a fantastic job of moving fast without sacrificing quality. We typically had less than one hour from when we arrived at a location to scout a spot for the interview, set up everything and start shooting.
While editor Carol Martori and assistant editor Rommel Mendoza were assembling the interviews and sifting through countless hours of pre-existing skate footage, the shooting crew went out and shot selected “re-creations” of Danny’s past utilizing a variety of formats. Jacob wanted these to be hand-held macro close ups mixed with selective focus of major moments in Danny’s life. For these, we decided film would be the best format. We used an Arri SR3 HS16mm with Zeiss Super Speed t1.3 primes for all high-speed work (typically 72-120fps) provided by Panavision Hollywood. For these shoots, I was able to tap into the Hurlbut Visuals intern program to round out my crew. They were stoked to get on-set experience and really helped out so we could complete our days.
Jacob, Hana, and the editorial team worked tirelessly to finalize the documentary for its world premiere at the 2012 South by Southwest Film Festival this past March. Danny’s life has been photographed by a plethora of people and once the word began to get out in the skate community that a doc was being made about him, we started to get an onslaught of footage. It was not uncommon that after an interview, the subject would pull out a box of dusty VHS tapes with absolute gold Danny Way footage on the tape. When the picture was finally close to “locked” (days before the SXSW deadline), Colorist Chris Hall and I holed up in the Bandito theatre on a DaVinci Resolve and spent five full days coloring the picture. It’s safe to say every format imaginable was used in the cut, and Chris and I were tasked with making the edits appear seamless.
Waiting for Lightning premiered in Austin in March of 2012, but Danny wasn’t done. Another screening was set for April 10, 2012 at the Cinerama Dome in Los Angeles and Danny and Jacob wanted to put a current stamp at the end of the film, alluding to the next endeavors of Danny Way. This would take us to Kauai, HI for a solo skate shoot on a never-before-seen structure that could have only been imagined in the mind of our protagonist.
A shoot in Kauai had been in the works since late 2011, but construction and weather delays didn’t allow for us to film anything before the SXSW deadline. One week prior to the LA premiere, we had a window. The weather forecast was rain every day, the same as it had been for the past month. Nonetheless, we were going to send a skeleton crew to the island for six days, just in case the weather broke — the gamble paid off. This particular shoot stressed high speed and mobility, so we chose to use two Red Epic cameras with Arri Ultra Primes and Cooke 10-1 HR 25-250mm zoom (provided by Tom Jordan at HD Planet Cameras).
Thanks to top-notch camera operators Ty Evans, Chris Murphy and Greg Hunt, we were able to get unbelievable angles skating with Danny on the structure, gorgeous lifestyle pieces and stunning aerial footage. For some additional angles, I brought along two 5Ds, one 7D with Hot Rod PL mount and a 1D Mark IV for 12-frame still bursts. We had a set of Leica R zooms and a complete Master Cinema Series rig. Operator Chris Murphy brought along a PL mounted Canon 11.5-138mm zoom made for 16mm cameras. This lens came in very handy when we had to punch in on the Epic sensor to record 240fps at 2K. Lenses made for 16mm cameras utilize more glass than 35mm lenses, since only a fraction of the sensor is used for recording; moreover, you can get wider with the 11.5mm. For the extreme wide shots, we used the Arri 8R prime lens shooting 96fps at 5K. With this lens, we could get shots within inches of Danny skating that look magnificent blown up on the big screen.
Danny skated for about three hours each day during the late afternoon so we could film with the best light. However, our mornings were dedicated to shooting product placement scenarios for ramp sponsors DC, Monster, Bud Light, Hi-Chew and Coleman.
I knew very little about skateboarding two years ago. Christian Hosoi and Tony Hawk were legends. Danny Way invented the Mega Ramp. Maybe I watched some skating in X-Games. But after the first interview, I knew working on this project would be an honor. I can’t say enough about the crew. When it was go-time, we all worked together and got the job done professionally to accomplish Jacob and Danny’s vision.
Samuel Goldwyn Films is releasing Waiting for Lightning theatrically December 7, 2012 in select cities and will be available for download on iTunes the same day. Click here for theaters and more info. Enjoy!
More camera tests between the Blackmagic Cinema Camera, Arri Alexa and Sony F5
Prepping a movie is one of the most important tasks you have as a cinematographer. You can design the...
Find the GoPro Hero 3 shots in the new Need for Speed SuperBowl Trailer and enter to win.
This week our focus is on adding the little bits that energize video village and make the Canon 1DC...
We have so many new digital tools at our disposal that you cannot just pick them up and start...
Thanks so much to everyone who gave it a shot and entered our Where's the GoPro in the Need...
The similarities of 16mm film and the Blackmagic Cinema Camera (BMCC) and why it is a great training ground...
When Canon and Hurlbut Visuals teamed up on this joint venture, we wanted to put together a trilogy of...