HP LP2480zx Dream Color: Your Eyes Into the DSLR Colorspace

When I began working on “Act of Valor” I was using an Asus 17” monitor to light with. When I got into the color correction bay, I noticed that I had over-lit scenes because the monitor was not seeing what the camera was ultimately seeing. Mike McCarthy at Bandito Brothers Post brought the HP LP2480 zx Dreamcolor monitor from their color correction bay to have on set with us and to replace the Asus. It was a computer monitor with a little stand for your desk. I asked, “Mike, what  is this?” He said, “Trust me, this monitor rocks.” He was not lying. We immediately ripped the little stand off and crafted mounts so that it could be mounted on dollies, c-stands, and cases so that it could hold up on location.

HP LP2480 zx Dream Color monitor on the set of “The Last 3 Minutes,” Carnival sequence

This is when it all clicked for me. When I looked at the back LCD of the Canon 5D and then to the Dream Color, they matched more closely than anything that I had seen. I have always felt that the back LCD is the true gauge of color, contrast, saturation, etc., but it is way too small and by using the Z-finder to enlarge it to your eye, there is an unnatural contrast that is added.

Dream Color mounted to the dolly for the Diner sequence on the Marines Commercial “For Us All”

It is the Dream Color for all lighting on the set for me. I take it everywhere. It has become my viewfinder into this 8 Bit compressed color space and I trust it. I have never gone to the color correction bay and seen something that I hadn’t seen when I was on the set. It has given me confidence as a Cinematographer with the limited latitude of HDSLR’s.

Dream Color at the Spa in Cancun

Dueling Dream Colors, I have mine mounted to the dolly while the Agency views the other in video village

When I look and see a cloud clipping on my Dream color, I know that I have to take the exposure down a bit to hold it. When I see a shadow going too black, I know that I have to open up my exposure a bit so that I can gain the detail necessary. I am not a big Histogram guy. I go with my eye and not some graph that means absolutely nothing when you are shooting HD. Everyone has tried to take this still photography latitude device and pull it over to the HD video mode. If you expose your Histogram in 4 of the 5 fields which is what they say is recommended, you will be overexposing your image and making it look like video very quickly. It is all about riding the fine line of starving the CMOS chip of light and giving it just enough so that it doesn’t look underexposed. It is a balance that turns this platform from an HD video capture device to a Digital Film capture device. When I pull up an image that I have exposed using the Dream Color, I punch over to the Histogram and my levels have not gotten out of the second field.

The HP Dream Color monitor holds its calibration for 4000 hours. We have 20 in Revolution Cinema Rentals inventory and the one that started it all only has 287 hours on it with 9 months of use.

Getting your HP Dream Color ready for the field

When you look at the HP Dream Color LP2480 zx Monitor, it looks like a computer monitor that should not be anywhere other than a desk. We have disproved that with months of testing and want to give you the necessary tips to make it battle ready.
Contact Freddie Fernandez at Hurlbut Visuals at 424-653-1133 and he will hook you up with Darin Necessary, our Elite Team McGuyver . He designed a plate that will attach the monitor to a 1650 Pelican traveling case, which turns it into traveling stand.

The Izzy HP Dream Color Monitor Bracket

Drill holes into the 1650 Pelican Case handle, Thumb Screws make it easy for on & off

Bracket now screwed to the 1650 Pelican Case handle

Dream Color is ready to roll out

Elite Team Members Joseph Jang and Jerry Rojas roll out on the AM Resorts travel and tourism spots in Cancun

Buy a piece of plexiglass and have it cut to the size of the monitor, you then use velcro to fix it to the screen. This will protect your screen while traveling and setting up in the field. Once you are settled and ready to light, you can remove the plexi for the best viewing.

Affix velcro to the edges of your plexiglass and also to edges of HP Dream Color, leaving the side with the function buttons open

Push Plexiglass onto monitor for travel

Gaffers tape and Duvateen are your new best friends. Use the gaffer’s tape to affix a piece of Duvateen or Black Cloth onto the monitor so that you can have a dark viewing area for exterior work.
Place your HDMI splitters and repeaters in your pelican case for easy organization. Cables and other nick nacks can be placed in there also.

Gaffer’s tape black cloth around exterior perimeter of monitor for Exterior viewing

Cut your foam out for all of your splitters, repeaters, HDMI barrels and power supplies

Kevin Anderson at Hurlbut Visuals at 888-514-0967 ext. 103 will also hook you up with Dave Kundson, my rigging guru, who has designed a baby pin that attaches to the thumb screws on the monitor bracket so you can mount it on a dolly, c-stand, etc.

Grip Side Inc.’s Baby Plate adapter for the HP Dream Color

Menus on your Dream Color

Go into your OSD control on the monitor: Disable warning messages and calibration limit.
Set your Monitor brightness to: 250 cd/m2
Go to Image Control on main menu, Custom Scaling set to: Fill to Aspect Ratio
Set your Color Space to: Full
Set your Video input control to: HDMI
Set your White Point/Color Temp to: 6500K

Coming from the film world where I relied on a light meter as my gauge for exposures, the most difficult adjustment in the HDSLR world has been finding an accurate lighting monitor that is fast yet intimate with the talent and the agency, so I am not in some black tent away from the action with waveform monitors and gack.  The HP Dream Color was exactly what I needed as a cinematographer to finally feel at ease.  What you see is what you get!

I would love to hear from you about monitors and what you choose to light with.

  1. Jon Roemer 5 years ago


    Thanks for posting this info. I’ve heard that this monitor is great for back at the studio, too. Helpful in editing/grading. You reference with this with the mention of Mike McCarthy and the color correction bay at Bandito Brothers.

    Any chance you can talk a bit about using the Dream Color in that situation? As a primary or secondary monitor in an edit or grading setup, if an I/O device is needed, recommended Dream Color menu settings, if setup in FCP or PP needs to be tweaked, etc.


  2. David Mudre 5 years ago


    Thanks so much for this in depth review. I had been really waiting to hear some more details about how you use this monitor in your setup and what you think of it ever since it was in the article about shooting for the Marines Commercial. I have been looking into options for high-end color/exposure-accurate in the field monitoring and this pretty much seals it for me. Now to just get a few more assignments so that I may be able to pay for it…

    Keep up the great work.

    ~David Mudre

    • Author
      Shane 5 years ago

      David Mudre, You are so welcome. HP offers re-furbished Dream Colors for 1600 bucks also.

  3. John 5 years ago

    Great post. Thank you for sharing.

    I am looking for a monitor for color correction. I have a Canon 60D and a macbook pro. Would you recommend this? I will be releasing my videos on the web.

    Thank you.

    • Author
      Shane 5 years ago

      John, absolutely and thank you so much for your kind words and support.

  4. Ramy 5 years ago

    I use the SD USB Output of the camera and use a sony Field Monitor LCD 7 inch.
    I also have a small iKan that I hook on top of the 7D to double check focus after each take.

  5. Federico 5 years ago

    great info as always! what do you use for calibrate the monitor?

    • Author
      Shane 5 years ago

      Federico, The monitor comes calibrated from the factory and holds its calibration for 4000 hours. We have 20 in our rental division and the first one that ever went out only has 287 hours on it.

  6. yellow 5 years ago

    Is it that you are seeing the ‘extended’ color space that the Canon DSLR’s may well be capturing, re your CS5 post previously. The Dreamcolor can emulated 7 color spaces, including AdobeRGB and DCI-P3.

  7. S. Allman 5 years ago

    First, my disclosure…I am an HP employee, but I don’t work for the division that developed this monitor and I’m not a sales person for HP. Opinions here are my own from experience with this product.

    The monitor was custom developed for Dreamworks initially, so it handles lots of color spaces. Two items I would add to your recommendation are the HP dreamcolor calibration kit (essentially a purpose built x-rite eye-one) and the dedicated monitor hood that HP sells. My group bought one of these monitors for critical image evalution and the two accessories are really requirements for maximum performance.

    Also, the calibration kit will allow you to calibrate the monitor to rec.709 as well as DCI and sRGB, so you’ll know what the image will look like on your target playback system in the field. Full gamut is actually wider than any of these color spaces and doesn’t necessarily reflect your playback system. rec.709, DCI, or sRGB seem like better color spaces to use, depending on where you’re targeting for playback.

    Now I just wish I could afford to buy one of these for home use!

    • Author
      Shane 5 years ago

      S. Allman, thank you so much for all of your suggestions for our co-collaborators.

  8. Charles 5 years ago

    Nice. What about day-and sunlight on the screen.

    • Author
      Shane 5 years ago

      Charles, that is what the black cloth and gaffers tape is for.

  9. JimBee 5 years ago

    A question, Shane, I was thinking that the five fields in the histogram represent about 5 stops of dynamic range, and that trying to use all of that range was a good idea when determining lighting and exposure. If your images are looking good using only the left two fields of the histogram, aren’t those images pretty dark? Do they then get a lot of processing in post? Or is that two-fields-of-the-histogram look pretty close to what ends up being the final image after color correction?

    • Author
      Shane 5 years ago

      JimBee, the images don’t look dark and with my lenses and my picture style I am getting anywhere from 12 to 12.5 stops of dynamic range out of my camera.

  10. Pip 5 years ago

    250cd/m2? Full gamut? Fill to aspect ratio?


  11. Dana 5 years ago

    Hi Shane, same sort of question along the lines of JimBee’s. If your exposure is within the first two fields of the histogram only, isn’t most of the picture going to be crunched to hell? I suppose I should just go do a quickie test and see what happens!

    • Author
      Shane 5 years ago

      Dana, here is the thing. To each his own. If you love your image in all 5 fields then have at it. From my experience I go for not using the histogram, period. The picture style that I use gives me the range an no it is not crunched all down and dark

  12. yellow 5 years ago


    Your comments about only into second field of histogram sounds crazy considering, gamma 2.2 for perception. It got me thinking, do you have some sort of pseudo linear colorspace workflow going on in CS5, interpreting your camera sources as linearised gamma to then reverse to 2.2?

    In the spirit of your openness in this area, could you post a short sample for download using you picture style and histogram?

    • Author
      Shane 5 years ago

      yellow, I don’t have to post, everything on my site is this mantra. “The Last 3 Minutes.”, Case, Marines, AM Resorts. Most of the time I go 2 fields and drift into the third on most of my exposures. What I am saying is that the histogram is not a good guide. Use your eye. Sometimes I want to blow stuff out and go into the 5th field, but I am not looking at the Histogram, I just do it because it looks awesome to me. You have to find your own way with this. I tell you what I have been doing as a cinematographer for over 20 years, which is going with my instincts and exposing in a way that I feel will assist the story the best. The more you get wrapped up in the technical side of it all the more the artistry goes away.

  13. Charles 5 years ago

    If you do what the manual tells you, the image is usually overexposed. And that’s the last thing we want for drama. Most textbooks on light in the past I used to read had little to do with how Hollywood pros work. Even a waveform is not everything.

    • Author
      Shane 5 years ago

      Charles, that is exactly right.

  14. Jeremy 5 years ago

    Shane, do you have a battery solution for this monitor – how do you power it in the field?

  15. Gianluca 5 years ago

    Jeremy, when I’m in the field I hook up the Dreamcolor with the vagabond which is basically a car battery in a bag. However the same manufactor (Alien Bees/Paul Buff) recently came out with a new more compact and lighter battery that I didn’t test yet because it has been in back order for more than 2 months. With the regular old battery I usually power the dreamcolor for a little bit more than 40 minutes (turning it on/off to use it only when I really need it).

  16. Hal Smith 5 years ago

    Slight OT Warning:

    Anyone have experience with the Dreamcolor panel option in the high end HP Elitebook laptops? I’ve got an 8730W mobile workstation with the lcd display and Nvidia 3700 graphics that can be upgraded to DC.

  17. Terjay 5 years ago

    This seems neat and all but it’s still over 2000 frigging euros. That’s way too much for anything less than a professional production.

  18. Yeah £1900 here in England

  19. Jeremy 5 years ago

    @Terjay – True, but I think Shane’s tips and suggestions are geared for exactly that, using a Canon HDSLR in a professional production. I think the point is, even if you have a professional budget, you still need to use the right tools with this technology or you’ll wind up with footage that was pretty far off from what you thought when you were creating it.

  20. Steve M. 5 years ago

    Hey Shane, Happy New Year!
    I realize this question is way off topic, but I have no idea how you keep track of all the posts you receive on this site, so i’m just putting it here on your last blog post. Anyway, can you give me some insight on how sensor size plays a role on DOF? Does sensor size have any effect on DOF? Can you compare this effect on a 5D Mark II vs 7D sensor sizes? I appreciate your time and reply. Thank you!

  21. Trevor 5 years ago

    Hey Shane,

    I’m really curious, are there any cheaper options close to this size of monitor that will give “good enough” results? Maybe not quite as professional with the features, but still reasonably accurate? I would love to get one of these but simply cannot afford it right now and I really need some sort of external monitor for viewing.


    • Author
      Shane 5 years ago

      Trevor, What is your price range? I would love to help you out.

  22. Trevor 5 years ago

    Hey Shane,

    I’m trying to find something in the $300-500 range, at least 17 inches or more, that would be reasonably accurate. I’ve been considering buying one of these: ( http://www.amazon.com/ViewSonic%252019s-VX2739WM-27-Inch-1920×1080-Monitor/dp/B003GBRXKU/ref=sr_1_1?ie=UTF8&qid=1294184949&sr=8-1 ), but after reading your assessment of your 17″ Acer, I’m concerned it won’t be accurate enough. Any thoughts on that monitor? Would there be anything workable at that price point for accuracy and size? If not, what do you suppose is the cheapest, reasonably good option? Thanks a lot Shane!

    • Author
      Shane 5 years ago

      Trevor, I have not tried any of the monitors that you have listed and wish that I could give you some feedback. I will have my tech guru Tim Holtermann look at all of these options and give you some feedback.

  23. Trevor 5 years ago

    Hey Shane,

    After doing some more research, I came across these other monitors as well. Ranked in order of cost and size of monitor.

    HP LP2475w (24″ IPS monitor) – http://www.amazon.com/HP-LP2475w-24-inch-Widescreen-Monitor/dp/B001FS1LLI/ref=sr_1_1?s=electronics&ie=UTF8&qid=1294234300&sr=1-1

    Dell UltraSharp U2711 (27″ monitor) – http://www.amazon.com/Dell-UltraSharp-U2711-27-inch-Widescreen/dp/B0039648BO

    Dell UltraSharp U3011 (30″ monitor) – http://www.amazon.com/Dell-UltraSharp-U3011-Widescreen-PremierColor/dp/B0043GDIT2/ref=dp_return_2?ie=UTF8&n=541966&s=pc

    They all seem promising, but just unsure of the actual performance in a digital cinema environment versus marketing claims.

  24. Kevyn 5 years ago


    Thanks for all you are doing. Great work! I’m days away from selling my EX1 to a colleague so I can upgrade and downsize. My first love is feature filmmaking, but I’m finding most of what I’m shooting right now is for iStock Video and Getty Images stock video. I recently bought the Canon 5DII, but I’m also considering purchasing either the Sony AG-AF100, EX1r, or EX3, or completely simplifying and purchasing a 7D, along with the monitor you recommend, and other accessories. I can’t afford it all. I have Zeiss prime lenses and a Letus Extreme, which I plan to sell. I just don’t want to shoot myself in the foot by selling my bread-and-butter EX1 camera and go with something that might be lesser quality. Any recommendations? And will your Boot Camp be on video?

    • Author
      Shane 5 years ago

      Kevyn, thank you so much for those kind words and your support. We are going to do another bootcamp this year and will be offering videos. I just did a huge educational cinema series for B&H that comes out at the end of Jan. It is totally for free giving back to the community. Check it out. It will be in their HDSLR tour guide.

  25. David 5 years ago


    FWIW, I’m also interested in what you think in response to Trevor’s question, though I could see spending something more like half, or a little more, of the prices I have seen for this monitor.

  26. Trevor 5 years ago

    Thanks a lot Shane, I appreciate it.

  27. Trevor 5 years ago

    Hey Shane,

    Just wanted to check in, did you happen to get any feedback from Tim about those monitors at all?


    • Brian 5 years ago

      Hey Trevor,

      Did you test out any lower cost monitors?

  28. Dimitri 5 years ago

    hello Shane,

    the last time I worked with an external monitor, i got really frustated with the hdmi connector on the camera.
    What solution do you use? good old gaffertape? I almost consider buying a viewfactor cage with hdmi clamp for this, but there should be a cheaper solution for this problem… please share your knowledge.

  29. joe 5 years ago

    Unless I’m missing something here, the Color Engine of the dreamcolor is going to be disabled when taking HDMI input from the 7D and probably the 5D because output on the HDMI is interlaced.. Can you comment on this?

    • Author
      Shane 5 years ago

      joe, that is correct. I am using the full color mode of the Dream Color. This is something that I have been in contact with them about, trying a work around so that the dream color engine is still on.

  30. Chris McAlister 5 years ago

    Hey Shane,

    I will be getting a Dreamcolor pretty soon here and was wondering if you could just break down the accessories I would need to make it work best in the field. If I am already using the HDMI out from an EVF on my DP6, so what do I need to do to run a connection to the Dreamcolor? Just an HDMI splitter, or is it more complicated than that? Do you guys use the HD-SDI output on the DP6? I’m trying to minimize my cords and “tangleage” and figure out the most ergonomic way for using this bad boy.

    Thanks so much man, and keep on rockin’ in the free world. You are the “voice of reason” when it comes to these cameras and have provided some of the best proof that they can in fact be used as movie-making machines.

    • Author
      Shane 5 years ago

      Chris McAlister, nice. The HP blog sets you up with the necessary items. Darin Necessary can hook you up with the bracket, the Pelican case is a 1610. I use Cat 5 cable and the splitters. They go up to 100′ without using a repeater. Unfortunately the HDMI function on this camera is a major problem, then the down convert to SD while recording is another bone job. I transmit or wire SD out of the Small HD monitor and use the Dream Color as my eyes to light with, then I disconnect and go SD. That way you can use BNC which is a tried and true cable that doesn’t have line loss and all the stuff that comes with sending a HD signal down a cable. HDSDI is another way but those convertors are a problem also, they overheat and send you down in flames quickly. SD baby.

  31. Chris McAlister 5 years ago

    Awesome, thanks. Yeah, I figured pretty much everything was on here. That bracket is essential. So you light with HD on the Dreamcolor and switch to SD upon shooting? Then a splitter from the SmallHD (or whatever on board monitor) to an SD conversion to the Dreamcolor? And BNC cables are the ones for that SD signal, right?

    Thanks again, brother.

  32. John Novotny 5 years ago


    I heard Eizo was showing off this self calibrating 2560 × 1440 native resolution wonder at NAB this year. Might be worth taking a look at.

  33. Bill Hamell 5 years ago

    Just bought a HP LP2475w awsome monitor does not have all the bells and whistles of the HP Dream-color 2480 ZX nor does it have the price tag. Color is exellent Now I just need to adjust brightness and contrast to suit!

    • Author
      Shane 5 years ago

      Bill Hamell,sweet, that monitor rocks, you will be in good hands.

  34. zacharyherche 5 years ago

    Hey Shane,

    Just got a HP LP2480zx, can you give me some advice on how to hook it up best. I will be using the 5dmkii and plan on monitoring in the field/post using cs5.5 production premium.


  35. Isaac 4 years ago

    Hi Shane,

    Should I use a LUT or just one of the profiles stored in the DreamColor for lighting, if I am using a Color Profile like Technicolor? A little confuse about this…

    Thanks for this site and for sharing your knowledge!!!

    • Author
      Shane 4 years ago

      Hi Isaac. When shooting a flat profile like Cinestyle, I light off of the Neutral Picture style profile on the camera and then switch back to Cinestyle when shooting.

  36. Steve Sepulveda 4 years ago

    Hi Shane,

    Love your blog and and videos. A wonderful inspiration and teacher. My questions is — I just picked up to used Dream Color monitors and I noticed that the calibration is over the 4000 hours that you stated earlier that they are good for from the factory. What is the best way to recalibrate them to get the color that I am looking for to light on set with the 5D? Also is lighting with the neutral picture style in your opinion and then switching to the cinestyle before you roll give you the best results with the 5D?



    • Author
      Shane 4 years ago

      Steve Sepulveda, I have passed this onto Greg Staten at HP who is the monitor guru, he will get back to us and I will pass this onto you. On the Cinestyle to Neutral switch over, yes I find this works like a million bucks. One of my trade secrets.

      • Steve Sepulveda 4 years ago


        Thanks for getting back to me. Looking forward to the answer from Greg at HP. Also, I was looking to get 2 of the plates made to mount the monitors on the pelican 1650, however I did not have any luck reaching anyone from the number on your blog. Can you give me the appropriate contact for that?

        Thanks again,


  37. Tom Miller 4 years ago

    Hi Shane, Found this thread from a couple of years ago, and wondering if it still applies. If you were buying a large monitor today, would it be HP DreamColor 2480, or is there something else that replaced it that you like better?

    • Author
      Shane 4 years ago

      Tom Miller. I’m still using the DreamColor 2480 all the time and haven’t found anything better. Thanks for the comment and support.

  38. Samuel 3 years ago

    Hi Shane,
    Just unpacked my HP lp2480zx like a little boy on christmas. First thing i did was log on to your blog to see if you had any advices on how to calibrate perfectly the monitor, After re-reading the blog and already having set the Menus you posted, i was wondering if you had any more advices on your years of experience and practice of how can i punch those extra settings on my monitor.
    Thank you for the advice and the inspiration.

    • Author
      Shane 3 years ago

      Samuel. Thanks for the kind words and support. In order to use the OSD menu with different color space options make sure you are plugged into one of the two DVI inputs on the Dream Color. From there you can access all the extra settings in the OSD menu. If you want to calibrate the colors SMPTE color bars work well. Here is a good tutorial on calibrating to color bars. http://spareroommedia.com/video/monitor_setup.html

      • Samuel 3 years ago

        Hey Shane,
        I was on location the last weeks but your post really helped me.Just had a few questions i am planning on using the Monitor as my first monitor for focusing e.t.c, But being shooting on the beach with the harsh sun do you recommend me changin tha brightness levels having in mind that i will be using the monitor also on post-production. And wich FPS do you recommend i read that you said that 24 was rock solid but i`ve been lately hearing that you can push it to 50 or 60.
        Thank You So very very much

        • Author
          Shane 3 years ago

          Samuel, I am not sure what you are referring to with 24. I crank the luminance level up to 250, it doesn’t effect the image at all and you can light beautifully and gauge exposure well. Just take a piece of black cloth and throw it over your head when viewing the monitor. That is what I do.

          • Samuel 3 years ago

            Hi Shane,
            As you can imagine i am a huge fan of you, you team and your vision, Each time i have a big question you are the one i rely on, on the next days i am planning on buying a Jib around $9,000 but i travel a lot so i really don`t know what to buy, my whole gear right now are 5d`s but am planning on buying a RED camera on the future.What would your advise be?
            I know how lucky i am on having the way to talk to you,and your amazing team.
            Keep rocking

  39. Dan 3 years ago

    Hi Shane!

    Amazing info, really appreciate it.

    I have the HP LP2480zx monitor, and I use it for location monitoring with a Canon 5dMII and Canon 5 MII through HDMI. I use the settings you recommend on the OSD, but I could not do the “Fill to aspect Ratio”, since the option is greyed out. Also, I can’t calibrate using the Color bars link you provided, for the hue/saturation and other menus appear grey. How were you able to calibrate you monitor for use with the Canon 5d? My image is over-saturated and too contrasted.

    Thank you!!

  40. Greg Greenhaw 3 years ago

    Hey Shane,

    For a field monitor do you recommend buying a used dream color monitor for 1k or a new small hd oled ac7?
    I’m kinda torn between the two. I already own a dp5 with eye piece. I also own a gefen wireless transceiver
    and was planing on connecting it to the either the dream color or the ac7. I also have a 24″ cinema display that I could also use instead.

    What are you thoughts.

    • Author
      Shane 3 years ago

      Greg Greenhaw. It depends on what you want to use it for. The Dream color would be a great lighting monitor, but the Ac7 is smaller and can be mounted on the camera.

  41. Drew Ruggles 3 years ago

    Hey Shane thanks for the post! I went ahead and ordered the LP2480zx as my primary color correction monitor, any suggestion for a secondary companion monitor from HP?

    • Author
      Shane 3 years ago

      Drew Ruggles, that is great. That is the one I use as well as their Dream Color lap top

  42. Mike R 2 years ago

    Hi Shane,
    I would love to get some more information as to how you got your dreamcolor to work accurately as an on set monitor with the 5d?

    I have just received my dream color and have found that when connected to my 5dmkiii via hdmi (with the latest firmware allowing for clean hdmi out) that the dream color has a huge green shift and looks nothing like the on board LCD image on the camera.

    Most of the dreamcolors menus are also greyed out which to me indicates that the dreamcolor’s engine is disabled.

    I believe this could be because the 5dmkiii outputs an interlaced hdmi signal that is not compatible with the dreamcolor.

    Can you offer any more information? I have spent a lot of time trying to solve this issue by testing different connections / settings / monitors and firmware with no luck.

    I’m hopeful that there is a solution as your blog suggests you have managed to get this monitor and the 5d to work well together.

    At the moment using the full colour space with the engine disabled (as no other options are available) is not an option as the image is nowhere near good enough to accurately light from.


    • Author
      Shane 2 years ago

      Mike R, Just so you know I did Act of Valor and 50 commercials all from the dreamcolor engine not being engaged and in full spectrum. I could see my subtle color contrast that I was doing as well as gauge color and contrast. The only way to engage the dreamcolor engine is to get a convertor that takes HDMI to DVI. Then the engine gives you all the LUT’s at your disposal. Never went there because of all the variables of possible failure in the field.

Leave a reply

Your email address will not be published. Required fields are marked *


[et_social_follow icon_style="slide" icon_shape="rounded" icons_location="top" col_number="auto" counts="true" counts_num="0" total="true" outer_color="dark" network_names="true"]