A few weeks ago, I wrote about dialing in all the menus so that your camera was ready to capture imagery that was cinematic and film friendly. These next two posts will be about the accessorizing required to turn your Canon 1DC into a Movie Making Machine.
I am going to break this one up into two posts because there is a lot of information. The first one will set your 1DC up to look and feel like a movie camera. The second post will go into adding the little bits that really make the difference.
“It Starts With a Cage”
My team and I shot 75% of the film Act of Valor on the Canon 5D MKII. When we finished that project, my elite team and I quickly realized that we needed to cage these cameras.This was essential so that we could add all the necessary accessories for the camera team to make it function more like a professional film/video camera. Kurt over at View Factor hooked us up with the first caged 5D MK II. It was so awesome, all powered and ready to rumble. I know that many of you still like the feel of your camera in stripper mode (which is just the body and a lens of choice). That is wonderful for some shooting, but having it a little more production friendly is what I would advise. Zacuto , Redrock , View Factor , and Letus make some great cages.
“Building Your Camera”
Now that you have your camera caged, you can start to build it out with various accessories. I would start with a base plate. Again, many vendors make baseplates for your cage – Zacuto, Redrock Micro, Letus, Element Technica and Arri .
The secret is to find one that works with an Arri based system of measurements. WHY? Because this enables all the professional accessories to be at your disposal. When you need other pieces and parts to build your camera out, it is not necessary to buy them. You can rent them when your system is Arri compatible.
Let’s use the Letus cage as an example. It has a proprietary baseplate and I found that none of their screw holes lined up with Arri. I reached out to GT and Hien over at Letus headquarters and had them design an Arri BP-9 spacing plate.
This made the cage compatible with the Arri BP-9 or the Element Technica sliding baseplate, which is the industry standard. If you go with the Arri BP-9 Baseplate, you will have to use the large dovetail plate.
Element Technica has its version of a large set up as well. With all of these smaller camera systems coming out, I really love the feel of mini rods and a 15mm rod set, then 19mm and the wide rod spacing.
We thought these were a little overkill, so we collaborated with Element Technica to build a small baseplate that is based on a 15mm mini rod set up and has its own micron dovetail plate. More streamlined and elegant.
We have the baseplate all set up now, so let’s add the touch and go plate to the bottom of the mini dovetail. This enables you to quickly clip into your head and stick support system. Whatever your head of choice is, it will come with a touch and go plate of some sort.
OK, we now have a caged camera with a baseplate and it is mounted onto a fluid head. Let’s jack it up!
“Giving You the Feel of a Movie Camera”
The Zacuto is lightweight, has an HDMI pass through and you can drop it from 12 feet. They make very durable pieces with a lifetime guarantee. The screen is not bad, will size to fit DSLRs, and has frame lines, which is so useful.
The Alphatron Electronic Viewfinder EVF-035W-3G came out two NABs ago and toted an iPhone display and SDI ports. I like the SDI ports. The screen’s color rendition is not bad.
The SmallHD DP4 was released over four years ago, right after Zacuto released theirs. It is still a great workhorse for me. I love the color space and rugged nature of it. I have made one of our own little innovations on this baby. Grenade pull the pin technology so that you can quickly go from EVF to monitor mode.
How do you attach this so that it works like a film camera? Well, many manufacturers have their idea of how all of this should work. I found that the MCS Letus EVF knuckle/mounting arm as well as the Element Technica EVF Knuckle do it the best.
You buy the EVF bracket that fits the EVF that you have purchased. This bolts onto the bottom, top or side of the EVF and it slides right into the Letus or Element Technica Knuckle.
The nice thing about the knuckle is that it can lock or have friction, which enables you to adjust it more easily. This really helps when you have it on your shoulder or on a dolly where a quick adjustment needs to be made without unlocking and locking again. That requires two hands and you usually don’t have two hands to work with when you are in Shoulder Rig mode. One of your hands has to be holding the camera. These are holdovers from 35mm film and they never go out of style. EVER!
“If You Like Operating Off a Monitor”
The Marshall 5.6 is a great size on your rig. It has many functions to assist in your operating experience – peaking, false color, zebra, etc. Lightweight and good color space.
My favorite from iKan is their MD7 7″ High Brightness 3G-SDI Monitor. I used this on Need for Speed. Battle tested and a great waveform. Good color space. It does HDMI and SDI, which is wonderful. It is a full 2K monitor and will play back Codex S Recorders so that you can check the proverbial gate.
The industry standard TVLogic has been guiding the way for many years, always delivering an amazing on board monitor for focus pullers with its peaking functions that put the others to shame. A built in HDMI to SDI convertor. This is HUGE! Not easy to judge contrast or color though.
For over two years, we have all been waiting in anticipation. The SmallHD DP-7 is finally out and I have to say it takes the best from all of these monitors and packs a wallop. SDI and HDMI. Great waveforms and scopes. Love the touch screen. They offer a Hi-Brite that we used on Need for Speed with the Steadicam. With an SD slot, you are able to input soon to come custom LUTs, with a built in Rec. 709 LUT. That is the bomb!
I used the SmallHD AC-7 OLED on Need for Speed. This was my go to exposure monitor and I was testing SmallHD’s Canon Log LUT and it rocks, so stay tuned for their updates.
Convergent Design has made a very good monitor as well that mimics the DP-7’s ergonomics and menu structure. Additional options include supporting ARRIRAW, Canon C500 4K RAW, Sony FS700 RAW, 2K RAW, and Record up to four separate HD streams. Loved the feel of it. Easy to navigate.
There are monitor brackets that mount onto your display and then into the EVF Knuckle just like the EVF did above with the Letus and Element Technica.
It gives you the ability to move it up and down. This is particularly useful when you go from a head, then want to go for a low angle on a sandbag. You can just flip the monitor up and you are ready to go.
In the next post, we will go into all the necessary little bits that energize your 1DC for video village and get it focus puller friendly.
The Canon 5D Mark II opened the floodgates to new and creative filmmaking three years ago and is still...
The Need for Speed camera test comparisons continue, with the Canon C500 vs. 35mm Kodak film stock.
The combination of the MoVI, Canon C500, aerial drones and Leica glass was a slam dunk on this Acura...
Po Chan and I will be leaving on a five-country tour of Asia with Canon in just a few...
I want to invite all of you to Cine Gear 2011. Hurlbut Visuals is launching our new DSLR Cinema...
The Bandito Brothers Production Company has a very unique work flow. I have adopted the Bandito Brothers “Real Time”...
How we shot the action sequences for a series of Trane AC commercials with extreme heat and a...
First up in our new series of gear reviews, the Panasonic Lumix DMC-GH4 with the interface unit that has...